Backup power
Generator Installation in Eugene, OR
Whole-home standby generators that start on their own when the power drops, and safe hookups for the portable generator you already own. Knoll Electric is a Generac Certified Installer serving Eugene and Lane County.
- Oregon CCB #252471
- Licensed and insured
- Generac Certified Installer
- Free written estimates
Get a free estimate
Tell us what’s going on and we’ll get back to you, usually the same business day.
Standby and portable
Two Ways to Keep the Power On
Whole-home standby generators
A standby generator sits outside like an AC unit, runs on natural gas or propane, and switches on automatically within seconds of an outage. We install Generac air-cooled units, including 26 kW models that can run most or all of a typical home, along with the automatic transfer switch that makes it hands-off.
Portable generator hookups
If you already have a portable generator, an inlet box and interlock kit (or a manual transfer switch) let you power selected circuits through your panel safely. No extension cords through windows and no backfeeding the utility line, which is illegal and can injure line workers.
- Generac Certified Installer
- Sizing based on what you actually need to run
- Automatic and manual transfer switches
- 30 and 50 amp generator inlets with interlock kits
- Permits, inspection and startup


Why Lane County Homeowners Are Adding Generators
The January 2024 ice storm left parts of Eugene and Lane County without power for days, and rural areas waited even longer. Wind storms and falling limbs knock out power every winter. For a lot of our customers the motivation is simple: keep the heat on, keep the fridge and freezer running, and keep the well pump going.
One customer put it this way after we replaced their panel and added a 50 amp generator hookup: outages happen quite a bit in their area, and now they’re covered.
What should a generator run?
We go through the house with you and decide what matters: furnace or heat pump, refrigerator, well pump, sump pump, internet, medical equipment, lights. That list decides the size of the generator and whether you need a whole-home transfer switch or a smaller essential-circuits setup.
Generator Work Often Pairs With a Panel Upgrade
If your panel is old or full, it’s usually smarter to replace it at the same time the transfer switch or interlock goes in. Our panel upgrade page covers what that involves.
Reviews
Generator Customer Reviews
Knoll Electric was great, they wired in a whole home generator link and did some work in the electrical panel. Brandon was fast, knew what he was doing and a friendly guy. I would highly recommend them.
Jason LannucciGenerator hookup
It was such an old system and wiring that it was becoming a major hazard and fire risk. They replaced our electrical box and gave us a whole new upgrade. Now we are up to date with code and the best part is they installed an attachment to run a 50-amp generator to our house when the power goes out. This happens quite a bit in our area.
JDPanel upgrade and generator hookup
FAQ
Generator Installation FAQs
What size generator do I need for my house?
It depends on what you want to run. Powering a few essentials like the fridge, furnace blower, lights and well pump takes far less than running the whole house including electric heat, a range and a dryer. We size the generator from a list of what you want powered, not a guess.
Is it safe to plug a portable generator into a dryer outlet?
No. Backfeeding through an outlet with a “suicide cord” can energize the utility line and injure line workers, and it can damage your generator and your home’s wiring. An inlet box with an interlock kit or a transfer switch is the safe, legal way to do it.
How long does a standby generator installation take?
The electrical work is usually one to two days once the pad, gas line and permits are lined up. Total time from order to startup depends mostly on equipment availability and the gas connection.
Do I need a permit to install a generator in Eugene?
Yes. Standby generators and transfer equipment need an electrical permit and inspection, and the gas connection has its own requirements. We handle the electrical permit and inspection.
Can a generator power my well pump?
Yes, as long as it’s sized for the pump’s starting load. Well pumps are one of the most common reasons our rural customers add a generator hookup.
Get Ready for the Next Outage
Call (541) 229-0502 or send the form with what you’d like to keep running, and we’ll recommend a setup and price it out.
